Tekrider
Tekrider Tekrider.com
Home Pure Snow Off Road OEM Gear Testimonials BIO FAQ How to Buy Price and Order Info Contact Us
CHECK LIST

Win a Tekvest Race Application Racer Tips Tekvest in Action Why do we use UHMW Links


 

 
Problems observed/reported. (Double check with driver)
Parts needed for work session. (Remember to refuel)
Tools and speciality items you should have forward in the staging area:
Toboggan/cart for tools/parts (3) 2' x 4' carpet runners (1) Tool set (2) Flash lights
Clutch tools Long magnets Anti freeze Pop riveter Devcon/bonder WD40
Contact cleaner Shop rags Silicone seal Safety wire Duct/elec tape Zip ties
Inject/Brake oil DE-ICER Hand drill/bits (2) pens (2) tape measures for quick align.
Clipboard Checklists Big hammer Grease guns Contact gloves Propane torch
Must-do checklist - daily & before finals! (check off when done)
Check track & studs Front suspension Rear suspension Skis and carbides Chain tension & oil
Brake system Carb to throttle Ski alignment Camber check Air box fit
Electrical wiring Hose/cable routing Exhaust & springs Replace studs Fuel & oil
Align clutches Clean clutches Check belt Check axle seals Lube up
Bolt check Replace parts used Tether cord Check fuel shut off Cover the sled

Tekvest.com


Home | Pure Snow | Off Road | OEM Gear | Testimonials | FAQ | BIO | How to Buy | Price and Order Info | Contact Us
Cool Stuff | Race Application | Racer Tips| Tekvest in Action | Why do we use UHMW
Copyright © 2005-2010 Tekrider. All rights reserved.
Tekrider